Whole Quilts Production Line consists the following Machines,
1.Opening machine 1 set
Use and characteristics: To loosen all kinds of fibre in bundles, then transfer them to next procedure via blower fan. The pre-opening is by notch-style roller to reduce fibre damage .the main opening is by card wire plate with high efficiency .it is equipped with strong magnet to absorb metal impurities.
Machine width 1100MM ,1300 MM Production capacities:50-250kg/h Power:7kw
2.Feeding machine 1 set
Use and characteristics: To mix opened fibre and transfer the even cotton layer to next procedure.Photoelectric constant-weight control and vibrating plate make the feeding quantity even and accurate.
Main specification: Machine width:1400-2350mm Production capacities:30-250kg/h Power:2.25-3.3kw
3. Double-cylinder double-doffer carding machine 1 set
Use and characteristics: It's suitable for combing of 1.5-20D×38-65mmartificial fibers. Double-cylinder high-speed combing makes fiber fully combedand the mesh more even. Feeding roller is driven by frequency conversion and itis equipped with anti-metal protection device
Use and characteristics: To fold and pave the mesh after carding evenly into certain width and thickness, then transfer it to next procedure after pressurization. All paving aprons are driven separately for easy adjustment, The reciprocal commutation is controlled by frequency conversion, and the rail is proof against leaking.
Main specifications: Input apron width: 4000 mm×6600mm Output apron width: 2200~7200mm Lapping speed: ≤45m/min Total power: 10kw
5.Middle speed needle punching machine 3 sets
Uses and characteristics: It is suitable production common nonwoven as needle punching nonwovens, asphalt felt substrate, geotextile etc. Three kinds of structural style to this machine are pre-needing, upstroke and down-stroke.
Main specification: Machine width:2000-7200mm Needle stroke:40-60mm Needle density:4000-6000s/m Needle frequency:100-650m/min Total power:9-30kw
6.Winder cutting machine 1 set
Uses and characteristics: It is at rear procedure of nonwoven production line, cutting the required width length for packing.
Main specification: Machine width:2200-7200mm Coiling roller diameter:350mm Liner speed:1-15m/min Total power:1.5-4.5kw
Audited Supplier 
){kind=link}